Scotsman Ice C1448 Bedienungsanleitung

Installation andUser's ManualModels C1448, C1848, C2148W

Panel Removal1 Locate and loosen the two screws at the frontedge of the top panel.2 Pull the front panel out at the top until it clearsthe top panel.3

Uncrate and Set UpBegin with unpacking the ice storage bin. Removethe carton, and using part of the carton as acushion, tip the bin on its back to rem

Plumbing RequirementsAll models require connection to cold, potablewater. A hand actuated valve within site of themachine is required. Air cooled mode

DrainsAll models require drain tubing to be attached tothem. Air cooled models have a single ¾” FPTdrain fitting in the back of the cabinet. Water coo

ElectricalThe machine is not supplied with a power cord, onemust either be field installed or the machinehard-wired.The dataplate on the back of the c

Final Check ListAfter connections,1 Wash out the bin. If desired, the interior of thebin could be sanitized.2 Locate the ice scoop (if supplied) and h

Initial Start Up1 Remove front panel. Check machine for anypacking or wires rubbing moving parts. Notelocation of control board in upper left corner o

AdjustmentsBridge Thickness - For Service Tech Only1 Push and hold Off till the machine stops.2 Remove evaporator cover.3 Remove curtain.4 Use a box w

Water flush settingThe water flush is factory set to the automaticposition, suitable for most water conditions. Thesetting can be changed to one of 5

Use and OperationOnce started, the ice machine will automaticallymake ice until the bin or dispenser is full of ice.When ice level drops, the ice mach

SwitchesThe panel in the front of the machine can be flippedup to access two switches – on and off.•To switch the machine OFF, push andrelease the Off

Options and Other InformationSmartBoardWhen this option is present there is an additionaldisplay panel in the area below the main controlboard. It is

Cleaning, Sanitation and MaintenanceThis ice system requires three types ofmaintenance:•Remove the build up of mineral scale from the ice machine’s wa

13 Remove water distributors from ice machine.Inspect each distributor for restricted orificeholes. Be sure all holes are full open.14 Locate ice thic

Air cooled condenser filter1 Pull air filters from their louvered mounts.2 Wash the dust and grease off the filter.3 Return them to their original pos

What to do before calling for serviceReasons the machine might shut itself off:•Lack of water.•Freeze cycle takes too long.•Harvest cycle takes too lo

SCOTSMAN ICE SYSTEMS775 Corporate Woods Parkway, Vernon Hills, IL 60061800-533-6006www.scotsman-ice.com17-3083-02

IntroductionThe design of this modular cuber is the result ofyears of experience and testing. Standard featuresinclude front accessible indicator ligh

Installation: Product SpecificationsLocation Limitations: The product is designed to beinstalled indoors, in a controlled environment. Aircooled model

Product InformationThe product is a modular cuber. That type ofmachine is designed to be placed on an ice storagebin or an ice dispenser. Many install

Product Description & Electrical RequirementsDimensionsw” x d” x h”Model Electrical CondenserMinimum CircuitAmpacityMaximum FuseSize*48 x 24 x 29

Cabinet Layout, Air CooledNovember 2006Page 5C1448, C1848, C2148WAir and Water Cooled User Manual

Cabinet Layout, Water CooledNovember 2006Page 6C1448, C1848, C2148WAir and Water Cooled User Manual

WaterThe quality of the water supplied to the ice machinewill have an impact on the time between cleaningsand ultimately on the life of the product. T